球探网比分

Contact

Anhui Secco Intelligent Technology Co., Ltd.

Sales address: Qianshan North Road, Shushan District, Hefei

5th Floor, Block B, North Building 499

Phone in charge: 187-0551-4743 Mr. Zhang

Telecom fixed line: 0551-65153937

0551-65153708

Business QQ: 390120255

Product URL: junpairhy.com

Search
You are here: Home > News > Special Reports

Method for routine maintenance of automatic induction door

2015-6-26 10:57:14 Article source: http://junpairhy.com/click :
1. If the automatic door is equipped with an auxiliary light sensor (infrared radiation protection device), when the door is opened, a person stands still and covers the auxiliary light sensor with his hand. The door should be kept open. Within seconds of the hand leaving, the door should close again.
2. After the person leaves the sensing area of the automatic door sensor, after a delay of 1-10 seconds (the time can be set by the automatic door switch parameters), the automatic door will automatically close, and the movement of the automatic door should be smooth and there should be no collision. Happening;
3. Observe the normal walking route of the automatic door. The daily walking route needs to be adjusted so that the person is facing the automatic door instead of the automatic door at a certain angle.
4. When approaching the automatic door, the sensing width range of the automatic door sensor should be larger than the width of the door fully opened;
5. People move towards the automatic door from outside or inside the door at normal speed. The automatic door should open automatically. The movement of the automatic door should be smooth and there should be no collision. After the automatic door is opened, the personnel will move at a speed of about 150mm-200mm per second When passing the automatic door at a slow speed, the automatic door should remain open;